- Locally grown plantation 35mm thick Hoop Pine with child safe LOSP preservative.
- Hand spliced 18mm sailing rope, UV stabilised.
- Rope length adjusters.
- Rope strap for hanging
To Hang: (see photos)Wrap the strap supplied around the beam/branch or eye bolt, feed the loop through just above the knot. Adjust knot so the loop is 10 -15cm long. Thread the swing rope through the loop until wooden swing seat is at the desired height.
Connect to adjuster - Open hinged latch, feed a loop of rope through from behind, close latch and pull tight.
Use the rope strap provided and hang as shown in the photos here. Make sure the surface it's hanging on is not rough or sharp. If neccessary wrap some rubber or heavy fabric around the beam or branch for protection. If using eye bolts use stainless steel with a minimum diameter of 8mm.