Installation, Use, and Care

To Hang

  • Hang on a sturdy support rated 150kg or higher (e.g., beam or tree branch) using the supplied rope strap. Wrap strap around the support, feed the loop through just above the knot (loop 10-15cm long—see photos). Ensure no rough or sharp edges rub the ropes—if needed, wrap rubber or heavy fabric around the support for protection. Or attach strap to an 8mm thick stainless steel eye bolt (not supplied)
  • Thread the hand-spliced sailing rope through the strap loop. Open the hinged latch on the rope adjuster, feed a rope loop through from behind, close the latch, and pull tight to set the seat height.
  • Test stability with an adult swinging up to 150kg total.
  • Ensure enough surrounding space clear to avoid collisions with people or objects.
  • Excessive friction will damage the rope and cause it to break. Use the rope strap provided and hang as shown in the photos below to minimise friction

Safe Use

  • Tested to over 200kg, safe for 1 adult or child up to 150kg. Adult supervision is mandatory for kids under 12.
  • Important

Proper use ensures safety. Misuse (e.g., overloading beyond safe limits, using a weak support, or hanging improperly) voids liability—see T&Cs at https://swingz.com.au/terms-and-conditions. Contact hello@swingz.com.au for questions.

hanging wooden swing

Care

  • Check rope, strap, adjuster, and hanging point regularly for wear—replace if worn.
  • Clean with mild soap and water.  
  • Store indoors if unused for long periods.